Specifikation RC4 Transpondrar
Dimensions (WxLxH): 15.7x18.0x4.5 mm
Weight: 3 g
Cable length: 80 mm
Humidity: Max. 90% relative
Max. Speed: 120 km/h
Temperature range: 0-50 °C
Signal transfer: Magnetic induction
Code resolution: 1.5 ms
Transponder position: Max. Height 15 cm
Power: Feed from free receiver channel (ch3 or 4)
Connection Plug: Connect using a standard Servo plug
Power consumption: 19mA @ 6 VDC
Operating voltage: 2.8 <–-> 16 VDC (recommended: 3.5 <--> 12 VDC)
Wire insulation: Aerospace/MIL-spec high-temp PTFE (Gasoline/Nitro resistant)
| Operating voltage | 3.0 - 16 VDC |
| Wire insulation | Aerospace/MIL-spec high-temp PTFE (Gasoline/Nitro resistant) |
| Max speed | 120 km/h |
| Weight incl. holder | 4.7 g |
| Humidity | Max. 90% relative |
| Temperature range | 0 - 50 °C |
| Dimensions | 16x19x6mm |
| Signal transfer | Magnetic induction |
| Works with | RC4 Timing System only! |
| Quick change holder | Yes |
| Power | Feed from free receiver channel (ch3 or batt) |
| Compatible with | MYLAPS Speedhive app |
| Power consumption | 14mA @ 6 VDC |
| Code resolution | 1.5 ms |
| Max speed | 120 km/tim |
| Temperature range | 0 - 50 °C |
| Dimensions | 16x19x6mm |
| Weight incl. holder | 4.7 g |
| Operating voltage | 3.0 - 16 VDC |
| Humidity | Max. 90% relative |
| Signal transfer | Magnetic induction |
| Code resolution | 1.5 ms |
| Power | Feed from free receiver channel (ch3 or batt) |
| Connection plug | Connect using a standard Servo plug |
| Power consumption | 14mA @ 6 VDC |
| Wire insulation | PTFE / Teflon |
| Quick change holder | Yes |
| Connector | Generic receiver 3-pole |
| Compatible with | RC2, RC3 & RC4 Timing System |
| Compatible with | MYLAPS Speedhive app |